iFlight ProTek25 Pusher 2.5inch HD Whoop Drone BNF Caddx Polar Vista Digital HD System with TBS Crossfire Nano RX for DJI FPV Goggles for TBS Radio Controller


Price: $381.99 - $359.00
(as of Mar 12,2022 05:28:18 UTC – Details)

iFlight ProTek25 Pusher is the new member as the ProTek series
less weight but great durability, maximum performance but long distance and flight time.
iFlight aim at creating the best light pusher style 2.5inch quad on the market.
Cinematic as well as light freestyle is where this rig feels home.
Cruising through the smallest gaps, chasing skateboards or just for fun in your backyard. 
iFlight naked Hero8 TPU case kit should be the perfect addition getting nice shots from literally anywhere.

Flight time:
Batteries used: iFlight Fullsend 4S
With naked-hero8: 650mAh 3-5min, 850mAh 4-6min
Without naked-hero8: 650mAh 5-7min, 850mAh 6-8min

– High performance SucceX-D 20A F4 Whoop AIO V3.2 to save weight and space
– Caddx polar vista Digital HD VTX System
– Butter smooth 1404 5500KV 

BNF Specs:
– SucceX-D Whoop AIO V3.2
– Motor: XING 1404 5500KV
– Wheelbase: 108mm
– Body Size: 76.3*76.3mm
– Top plate thickness: 3mm
– Top and bottom plate spacing: 21mm (aluminum standoff height) 
– Propeller size: 2.5 inch
– FC pattern: 25.5*25.5mm / 20*20mm
– FPV cam spacing: 20mm
– Weight: 143.8g (without battery)

– 1x iFlight ProTek25 Pusher drone(pre-built and tested )
– 1x Caddx Polar Vista Digital HD VTX System Kit
– 1x iFlight Sigma ipex/UFL LHCP 5.8g antenna
– 2x iFlight Nazgul 2525 propeller (Set of 4 – Color May Vary)
– 1x 15x150mm strtap
– 1x 15x180mm strtap

FC + ESC AIO //  SucceX-D Whoop AIO V3.2
*Blackbox:16Mb Onboard Flash
*ESC Firmware:G-H-30 BLS

Additional Suggested Parts(not included)
for DJI FPV Goggles,for DJI FPV Goggles V2
for TBS Radio Controller
Battery 4S 850mAh / 4S 650mAh xt30 plug
naked-hero8 kit

– ProTek25 Pusher HD whoop drone built with Caddx Polar Vista Digital VTX System, built with TBS crossfire nano RX for TBS remote controller, built with polar vista for DJI fpv goggles, for DJI fpv goggles V2.
– Durable aerodynamic PP body and carbon two-piece frame construction Only 8 screws to detach the main plastic body from the carbon frame, motors and electronics. Quick, easy and cheap repair or customization!
– Reversed Pusher-style design for enhanced thrust and efficiency Propeller thrust can travel without any disturbance of frame or wires; Increased flight time, less noise and less propwash!
– Powerful XING 1404 motors to carry your naked-hero8 Lightweight(Less than 250g weight), efficient and maximum power for it’s size; More than enough thrust for cruising and acro flying without restriction!
– When you have any question,please feel free to contact us at first time