$226.74 - $199.88
(as of Mar 11,2022 10:24:38 UTC – Details)
Unassembled DIY Version, Need client to assemble the Whole set.
1. Do not modify any parameters and wiring without knowing the flight control and remote control.
2. The product is already welded, you only need to assemble it, and bind the receiver with transmitter, then could fly.
3. Do not charge the battery when you are not at home. Do not charge the battery immediately after flying. Do not over-discharge the battery. (Over-discharge may cause the battery to be charged and become obsolete.) If the battery is fully charged, it may not be charged for a long time.
4. Turn on the remote control before powering the aircraft. After the flight is over, unplug the power supply and turn off the remote control to prevent accidents.
5. You can fly it on open space when there is no wind, do not fly in the crowd and surrounding areas with interference.
6. The product is unassembled. Please watch the teching video before you assemble it, we have the instructions, which would come with the products, and we have a professional dedicated technical team to help solve the relevant questions.
7. If the customer needs to assemble, we will give a reasonable quotation for additional logistics freight and technical assembly fees.
8. This product is not a toy and is not suitable for children under 14 years old.
9. If you are a beginner, it is recommended to be assisted by experienced adults.
10. Novices should pay attention to the fact that when the plane is turning, do not take the plane with your hand or let the child take it to prevent it from being scratched.
11. When the aircraft falls into the wall or hit other objects at high altitude, please close the start switch in time. Otherwise, it may cause damage to the flight control motor. Check the aircraft for damage. If the screw is loose, wait until everything is normal before you can take off again.
Flight Control: V2.3 KK Flight Control
Motor: A2212 1000KV Brushless Outrunner Motor 13T
ESC: 2-4S 30A RC Brushless ESC Simonk Firmware with 5V 3A BEC
Paddle: 1045 3k Carbon Fiber 2-blade paddle
Loading weight: less than 500g
Recommended Battery: 3S 2000-8000mah Battery (Not included)
1* 550 Nylon Fiber Flamewheel Frame Kit with T Plug Male Connector Silicone Wire
4* A2212 1000KV Motor with installed base and welded with male banana bullet
4* 30A ESC and welded with female banana bullet
1* KK V2.3 Flight Control
2* Set of CW CCW 1045 Propeller
1* Landing Skid with Skid-proof Sponge
1* Other accessories: rubber pad and locking rope
1* Simple assemble manual
FrameWheel F550 (Notice Not Made by DJI) is a multi-rotor designed for all pilots for fun or AP, it can achieve hovering, cruising, even rolling and other flight elements.
This combo we provide KKmulticopter 2012 flight controller with 2.3 firmware,it also can suprisingly have this effect.
It can be applied for entertainment, aerial photography, FPV and other aeromodelling activities.New design PCB board speical for F550,support standard 50mm controller board like MK,KK, FF,MWC.
Battery and remote controller is optional