TCMM RC F402D 5V 2A 2-5s Flight Controller FC Built-in OSD Support PPM/Ibus/Sbus/Dsmx for FPV Racing Drone Quadcopter

0
11


Price: $63.19
(as of Mar 21,2022 16:10:18 UTC – Details)


Product Description

00

Welcome to MuMu RC Store. MuMu RC Store is an innovative enterprise focusing on drones and racing drones from the first perspective. And MuMu RC Store is committed to creating the pioneer of the competitive drone industry with innovative technology to provide a full set of competitive drone solution services, carbon fiber sheets, and its creative products. MuMu RC always takes responsibility for making reliable products that are popular with consumers.As a competitive drone industry, MuMu RC has many innovative technologies and application models. The company has accumulated years of flight control, image stabilization, power system design, and carbon fiber board innovation technologies on racing drones, which provide a solid backing for the continuous development and application of competitive drone product technologies. In order to ensure product quality, MuMu RC insists on independent design, R & D and production, and strictly control quality from all aspects. MuMu RC has always been committed to providing cost-effective first-view racing drone products, and constantly improve and innovate to meet the ever-changing market demand.

Main Features:

1

1

2

2

3

3

4

4

The flight controller equipped with F4 chip can support the flight control to run the flight calculation at 32K speed (support the operation of DHOTS 150/300/600/1200 high-speed digital signal ESC, the combination of the two brings better flight effect) In turn, it brings powerful computing power and computing speed, making player flight easier, stable, smooth, and safe

Direct integration and firmware direct compatible with the supported OSD module solution, you can directly adjust and set various OSD settings in the ground station, use the firmware compatible OSD solution, do not need the player to flash the OSD data and firmware again, OSD all aspects See the data for the needs, battery voltage, flight current, flight time and all other practical necessary parameters. The setting is simple and convenient. There are more various personalized settings.

Plug-and-Play

No need to solder tiny wires

Integrated 5V BEC flight control supports direct power input, with more diverse wiring methods, simple installation and wiring

When using a PPM or SBUS receiver, you need to connect the 3-point jumper next to the upper machine pad to the corresponding direction to detect the PPM or SBUS signal normally. SBUS signal configuration RX6, DSM configuration RX1

55

Specifications:

Name: F402D

MCU: STM32F405

Gyro: MPU6000

BEC: 5V 2A

Input voltage: 2-5 S Lipo Support Receiver: PPM,Ibus,Sbus,Dsmx

Black box: YES Barometer: YES

Firmware: Omnibus F4 SD Buzzer interface: YES

Betaflight OSD: AT7456E PCB Size: 35.5*36 mm

Mounting Hole: M3*30.5*30.5 mm Weight: 6.6 g

⭕〖 Professional 〗: Direct integration and firmware direct parts are compatible with the supported OSD module solution, integrated 5V BEC flight control supports direct power input, with more diverse wiring methods, simple installation and wiring. The flight controller has less noise and fewer oscillations across the throttle band without adding any delay.
⭕〖 Advanced 〗:This flight controller is ready for anything with 4 uarts, black box and a powerful F4 processor to run it all. It has 35.5x36mm PCB with M3*30.5*30.5mm mounting holes. Weight: 6.6g.
⭕〖High Quality〗: The flight controller is 100% new and it is produced by TCMM. It is well made and durable. The design of this flight controller focuses on quality. This is much more affordable.
⭕〖 Fast Response 〗: MPU6000 gyroscope with SPI bus mode brings fast response time and excellent shock absorption effect. The flight controller has the STM32F405 main control chip, which can Support flight control to run flight calculation at 32K rate.
⭕〖 Important Notes 〗: When using a PPM or SBUS receiver, you need to connect the 3-point jumper next to the upper pad to short the corresponding direction to detect the PPM or SBUS signal normally. SBUS signal configuration RX6, DSM configuration RX1.